Chapter 1 Introduction; Overview - Supermicro 5038K-i User Manual

1-1

Overview

The 5038K-i is a high-end workstation comprised of two main subsystems: the
GS5A-753B mid-tower chassis and the K1SPE single Intel® processor motherboard.
Please refer to our web site for information on operating systems that have been
certifi ed for use with the 5038K-i (www.supermicro.com).
These units are sold as complete systems with the motherboard, processor, and
heat sink assembly factory installed. These components are not user serviceable,
and the user should not attempt to remove or modify these components other than
adjustments specifi cally outlined in this manual. Making other adjustments to these
components risks damaging the system and voiding the system warranty.
If you believe there is a hardware problem with one of these components, please
contact Supermicro's technical support team or your service contact if you have
purchased a service package for this system.
In addition to the motherboard and chassis, various hardware components have
been included with the 5038K-i, as listed below:
•
One (1) rear exhaust fan, two (2) front cooling fans, two (2) top exhaust fans at
the top under the radiator for the liquid cooling unit
•
Two (2) chassis 3.5" HDD cages (MCP-220-GS504-0N)
•
One (1) chassis 2.5" HDD cage (MCP-220-GS505-0N)
Note: For your system to work properly, please follow the links below to download
all necessary drivers/utilities and the user's manual for your system.
•
Supermicro product manuals:
•
Product drivers and utilities:
•
Product safety information:
http://www.supermicro.com/about/policies/safety_information.cfm
•
If you have any questions, please contact our support team at:
support@supermicro.com
Chapter 1
Introduction
http://www.supermicro.com/support/manuals/
ftp://ftp.supermicro.com
1-1
Chapter 1: Introduction