Supermicro 5038K-i User Manual page 108

5038K-i User's Manual
(Port 0 ~ Port 5) Spin Up Device
On an edge detect from 0 to 1, set this item to allow the PCH to start a COMRE-
SET initialization to the device. The options are Enabled and Disabled.
(Port 0 ~ Port 5) sSATA Device Type
Use this item to specify if the sSATA port specifi ed by the user should be con-
nected to a Solid State drive or a Hard Disk Drive. The options are Hard Disk
Drive and Solid State Drive.
Server ME (Management Engine) Confi guration
This feature displays the following system ME confi guration settings.
•
General ME Confi guration
•
Operational Firmware Version
•
Recovery Firmware Version
•
ME Firmware Features
•
ME Firmware Status #1
•
ME Firmware Status #2
•
Current State
•
Error Code
•
Altitude
•
MCTP Bus Owner

PCIe/PCI/PnP Confi guration
The following PCI information will be displayed:
•
PCI Bus Driver Version
•
PCI Device Common Settings
7-28