Supermicro 5038K-i User Manual page 94

5038K-i User's Manual
Halt On Mem (Memory) Training Error
Select Enabled to put memory training errors on halt. The options are Enabled
and Disabled.
ECC Support
Select Enabled to enable Error Checking & Correction (ECC) support for onboard
memory modules. The options are Auto, Enabled and Disabled.
Enhanced Log Parsing
If this item is set to Enabled, additional output spacing will be added for memory
debug-logging for easy machine parsing. The options are Disabled and Enabled.
MemTest (Memory Test)
Select Enabled to enable memory testing during system boot. The options are
Enabled and Disabled.
MemTest (Memory Test) Loops
This item determines how many times of complete memory tests should be
performed during system boot. Enter "1" to run the memory tests infi nitely. The
default setting is 1.
Rank Margin Tool
Select Enabled for the memory rank margin tool to run after DDR3 memory
training. The options are Disabled and Enabled.
RMT Pattern Length
Use this item to set the pattern length for the memory margin tool. The options
are Disabled and Enabled.
Per Bit Margin
Select Enabled to enable logging from the serial port that is based on the DDR
Per Bit Margin Data. The options are Disabled and Enabled.
Attempt Fast Boot
Select Enabled to skip some portion of Memory Reference Code from memory
testing whenever possible to increase bootup speed. The options are Disabled
and Enabled.
Attempt Fast Cool Boot
Select Enabled to skip some portion of Memory Reference Code from memory
whenever possible to expedite cold system boot. The options are Disabled
and Enabled.
7-14