Supermicro 5038K-i User Manual page 114

5038K-i User's Manual
Putty KeyPad
Use this item to select Function Keys and KeyPad settings for Putty, which is a
terminal emulator designed for the Windows OS. The options are VT100, LINUX,
XTERMR6, SCO, ESCN, and VT400.
Redirection After BIOS Post
Use this item to enable or disable legacy Console Redirection after BIOS POST
(Power-On Self-Test). When "Bootloader" is selected, legacy Console Redirec-
tion is disabled before booting the OS. When "Always Enable" is selected, legacy
Console Redirection remains enabled while the OS boots up. The options are
Always Enable and Bootloader.
SOL
SOL Console Redirection
Select Enabled to use the SOL port for Console Redirection. The options are En-
abled and Disabled.
*If the item above set to Enabled, the following items will become available for
user's confi guration:
SOL Console Redirection Settings
Use this feature to specify how the host computer will exchange data with the client
computer, which is the remote computer used by the user.
Terminal Type
Use this feature to select the target terminal emulation type for Console Redirec-
tion. Select VT100 to use the ASCII Character set. Select VT100+ to add color
and function key support. Select ANSI to use the Extended ASCII Character Set.
Select VT-UTF8 to use UTF8 encoding to map Unicode characters into one or
more bytes. The options are ANSI, VT100, VT100+, and VT-UTF8.
Bits Per second
Use this feature to set the transmission speed for a serial port used in Console
Redirection. Make sure that the same speed is used in the host computer and the
client computer. A lower transmission speed may be required for long and busy
lines. The options are 9600, 19200, 38400, 57600 and 115200 (bits per second).
Data Bits
Use this feature to set the data transmission size for Console Redirection. The
options are 7 (Bits) and 8 (Bits).
7-34