Ipmi - Supermicro 5038K-i User Manual

5038K-i User's Manual
7-5

IPMI

Use this feature to confi gure Intelligent Platform Management Interface (IPMI)
settings.
BMC (BaseBoard Management Controller) Firmware Revision
This item indicates the BMC fi rmware revision used in your system.
IPMI Status
This item indicates the status of the IPMI fi rmware installed in your system.

System Event Log
Enabling/Disabling Options
SEL Components
Select Enabled to enable all system event logging support at bootup. The options
are Enabled and Disabled.
Erasing Settings
Erase SEL
Select Yes, On next reset to erase all system event logs upon next system reboot.
Select Yes, On every reset to erase all system event logs upon each system reboot.
Select No to keep all system event logs after each system reboot. The options are
No, Yes, On next reset, and Yes, On every reset.
7-48