Printing Readings; Transferring Readings To A Computer - Elcometer 456 Operating Instructions Manual

6 PRINTING READINGS

To print your readings to a printer or to a PC, use the PRINT/OUTPUT function which is available from the
main menu of your gauge.
Using this function, a single batch of readings, or batches of readings can be output via the RS232 interface
and cable.
Note: To use this function, first setup using MENU/SETUP/OUTPUT

7 TRANSFERRING READINGS TO A COMPUTER

Transfer the readings you take from the memory of the gauge to a PC for archiving, analysis and reporting.
7.1 SOFTWARE
Your gauge comes complete with software which allows data to be transferred to a PC using Bluetooth
the optional PC connection cable. The CD supplied with your gauge includes the following software:
• Elcometer Data Transfer Software (EDTS+ Excel Link)
• ElcoMaster™ Software for Measurement Data
• ElcoMaster™ Data Conversion Software
The use of ElcoMaster™ software is recommended as it contains a report designed specifically for duct
deposit measurements. Data can be transferred from the batch memory of the Elcometer 456 gauge and
can also be transferred as the measurements are taken. ElcoMaster™ includes all the charts that you may
need together with a report designer to let you design your reports the way you wish to see them.
ElcoMaster™ can also be used to create personalised welcome screens and upload them to your gauge.
R
®
or
11