Transferring Readings To A Computer [T] - Elcometer 319 Standard Operating Instructions Manual

R
10.2 PREPARING YOUR GAUGE FOR USE WITH AN EXTERNAL PROBE
Attention: The external temperature probe can be capable of measuring temperature in excess of the
physical operating range of the gauge. When using your gauge with an external temperature probe, take
care to avoid exposing your gauge to excess temperatures.
1. If a ferrous material surface is available, attach the gauge to the surface using the magnets built into
the back of the gauge. Ensure the gauge is attached securely before use.
2. If the external temperature probe is magnetic, attach the probe to the magnetic surface.
3. If the external temperature probe is for measuring liquids, place the probe tip in the liquid.
Your gauge is now ready to take measurements.
Note: If the temperature of the external temperature probe exceeds the range of the gauge there is no error
message or warning, but the reading value will be saved as '---'.

11 TRANSFERRING READINGS TO A COMPUTER [T]

Your gauge is supplied with ElcoMaster and ElcoMaster Mobile software. ElcoMaster allows you to:
• Monitor measurements remotely via Bluetooth
• Download readings data from your gauge to the ElcoMaster data management system
• Keep your survey notes, inspection reports, photographs and all your other inspection information in
one place - ElcoMaster
• Create accurate and professional reports configured to allow your data to be understood easily at all
levels
• Create PDF versions of your reports and e-mail direct from ElcoMaster
28