Machine Shutdown; Movement Control - Haulotte HA16X Operator's Manual

Engine-powered articulated lifts, 12 - 26 m
E
- Driving

3.2.2 - Machine shutdown

• Turn the key of the control box activation selector ( 72 ) to the center.
• The machine is shut down.

3.2.3 - Movement control

Bucket compensation is possible regardless of the work height. Even at low movement speeds, use the
controls with caution.
N.B.-:-F
OR MACHINES FITTED WITH
RELEASE OF THE SELECTOR CAUSES ALL MOVEMENT TO STOP
HA120PX - HA16SPX - HA18SPX - HA16PX - HA18PX -HA20PX -HA260PX - Ground control box controls (emergency
station)
Control
Lifting/lowering of
arm
Lifting / lowering
of boom
Boom telescope
out/in
Jib lifting/lowering
2420332370
: H
OLD THE SELECTOR
Push the arm lift/lower selector ( 12 ) upwards to raise the arm.
Push the arm lift/lower selector ( 12 ) downwards to lower the arm.
Push the boom raising selector switch ( 10 ) upwards to lift the boom.
Push the boom raising selector switch ( 10 ) downwards to lower the
boom.
Push the boom telescoping selector switch ( 9 ) to the left to extend the
telescope.
Push the boom telescoping selector switch ( 9 ) to the right to retract
the telescope.
Push the jib selector switch ( 8 ) upwards to lift the jib.
Push the jib selector switch ( 8 ) downwards to lower the jib.
E06.11
( 228 )
UPWARDS TO VALIDATE MOVEMENT
.
Action
EN
A
B
C
. T
HE
D
E
F
G
H
I
73