Driving; Recommendations; Checks Before Use; Visual Inspections - Haulotte HA16X Operator's Manual

Engine-powered articulated lifts, 12 - 26 m
E

- Driving

Driving

1 - Recommendations

The manager of the company responsible for the commissioning of the machine must ensure that the
machine is fit for the work it is to perform. i.e. that the machine is suitable to carry out the work in
complete safety in compliance with this Operator Manual. All managers who are responsible for
persons operating the machine, must be familiar with the regulations currently applicable in the country
of use and ensure that they are adhered to.
Before using the machine, read the previous chapters in this manual. Ensure that you have understood
the following points :
• Safety precautions.
• Operator's responsibilities.
• Presentation and the operating principle of the machine.

2 - Checks before use

Each day and before the beginning of a new work period and on each change of operator, the machine
must be subjected to a visual inspection and a complete functional test.
Any repairs required must be performed before the machine is used, its correct operation depends on it.
Find all the function indicators and controls in
2.1 -

VISUAL INSPECTIONS

2.1.1 - General mechanical functions

For all the following checks, ensure that the machine is switched off.
Check the following points :
• The presence of the identification plate, labels and operator manual :
• Their state of cleanliness and visibility.
• Clean or replace if necessary.
• Visual state of the machine :
• Absence of leaks (battery acid, hydraulic oil, etc.). Absence of foreign objects on all surfaces. Call the
staff in charge of the maintenance if necessary.
• No missing or loose parts (bolts, nuts, connectors, cables, etc.). Refer to the "tightening torques" table
quoted in the Maintenance Book.
• Absence of cracks, broken parts, damaged paint. No deformations or other anomalies on the
structure's parts.
2420332370 E06.11
Section C 5 - Control boxes
EN 65
A
B
C
D
E
F
G
H
I