Risk Of Burns And Explosion; Risk Of Crushing And Collision - Haulotte HA16X Operator's Manual

Engine-powered articulated lifts, 12 - 26 m
A
- Safety precautions

3.2.5 - Risk of burns and explosion

For any intervention on the power sources, wear glasses and protective clothes (acid spray).
N.B.-:-A
CID IS NEUTRALISED WITH SODIUM BICARBONATE AND WATER
• Do not work in an explosive or flammable atmosphere (spark, flame, etc.).
• Do not touch the hot parts of the hydraulic power source (engine, filters, etc.).
• Do not bridge the battery terminals with metallic objects.
• Do not service the battery close to a spark, naked flame, glowing tobacco (emissions of gas).
• Do not fill up the fuel tank, when the engine is running and/or close to a naked (open) flame.

3.2.6 - Risk of crushing and collision

When in the platform, respect the following instructions :
• During operation, keep all the parts of the body inside the platform.
• To position the machine close to obstacles, use the raise controls (arm, boom, etc.) instead of the
drive controls.
• Ensure there are no obstacles (structure) in the work area.
• When driving, position the platform so as to provide the best visibility possible.
• Always use another person to guide machine movements in case of poor visibility.
• All the personnel in the platform or on the within the vicinity of the machine must wear Personal
Protection Equipment (safety helmet, etc.).
• When lifting or lowering the basket and during driving, the operator must check that the area above,
below and to each side of the machine are clear.
• When moving the machine, ensure that the machine operating areas is free of persons and obstacles.
Do not operate other machines (crane, platform, etc.) in the work area.
Take account of the distance, reduced visibility and blind spots during use of the machine.
18 2420332370 E06.11
.
EN