Installation Manual
Important
Meter installation and wiring should be performed by suitably trained personnel only in accordance
with the applicable code of practice.
Procedure
Wire to the appropriate input terminal and pins.
Figure 3-25:
A
A. Discrete input
B. Channel C or D
C. Switch
3.8.2
Wire the Discrete input (externally powered)
Important
Meter installation and wiring should be performed by suitably trained personnel only in accordance
with the applicable code of practice.
Procedure
Wire to the appropriate input terminal and pins.
Figure 3-26:
A
A. Discrete input
B. Channel C or D
C. 30 VDC (maximum)
Note
•
Maximum positive threshold is 3 VDC.
•
Minimum negative threshold is 0.6 VDC.
42
Discrete input wiring (internally powered)
B
Discrete input wiring (externally powered)
B
®
Micro Motion
Model 5700 transmitters
December 2014
C
C