Emerson Micro Motion 5700 Installation Manual page 36

Installation Manual
3.5 Wire the Discrete output in an explosion-proof/
flameproof or non-hazardous area
• Wire the Discrete output (internally powered) (Channels B/C)
(Section 3.5.1)
• Wire the Discrete output (externally powered) (Channels B/C)
(Section 3.5.2)
• Wire the Discrete output (internally powered) (Channel D)
• Wire the Discrete output (externally powered) (Channel D)
3.5.1 Wire the Discrete output (internally powered) (Channels B/C)
Important
Meter installation and wiring should be performed by suitably trained personnel only in accordance
with the applicable code of practice.
Procedure
Wire to the appropriate output terminal and pins.
Figure 3-16:
A
A. Discrete output
B. Channel B or C
C. See Figure 3-17
D. Counter
36
Discrete output wiring (internally powered)
B
for output amplitude versus load resistance
(Section 3.5.3)
®
Micro Motion Model 5700 transmitters
December 2014
(Section 3.5.4)
C
D