Installation Manual
Figure 3-6:
1
A
2
A. mA/HART output
B. 250–600 Ω resistance
C. HART device
3.3.2
Wire the mA/HART output (externally powered)
Important
Meter installation and wiring should be performed by suitably trained personnel only in accordance
with the applicable code of practice.
Procedure
Wire to the appropriate output terminal and pins.
Figure 3-7:
1
A
2
A. mA/HART output
B. 5–30 VDC (maximum)
C. 250–600 Ω resistance (see
D. HART device
30
mA/HART output wiring (internally powered)
mA/HART output wiring (externally powered)
Figure 3-8
for maximum loop resistance)
®
Micro Motion
December 2014
C
B
B
C
D
Model 5700 transmitters