Emerson Micro Motion 5700 Installation Manual page 41

December 2014
Figure 3-23:
7
A
8
A. mA input
B. 100 Ω input resistance at Channel D
C. 4–20 mA input device
3.7.2 Wire the mA input (externally powered)
Important
Meter installation and wiring should be performed by suitably trained personnel only in accordance
with the applicable code of practice.
Procedure
Wire to the appropriate input terminal and pins.
Figure 3-24:
7
A
8
A. mA input
B. 100 Ω input resistance at Channel D
C. 4–20 mA input device
D. 30 VDC (maximum)
3.8 Wire the Discrete input in an explosion-proof/flameproof
or non-hazardous area
• Wire the Discrete input (internally powered)
• Wire the Discrete input (externally powered)
3.8.1 Wire the Discrete input (internally powered)
Quick Installation Guide
mA input wiring (internally powered)
B
mA input wiring (externally powered)
B
Installation Manual
C
(Section 3.8.1)
(Section 3.8.2)
C
D
41