Installation Manual
Figure 3-9:
B
C
A
A. 250–600 Ω resistance
B. HART-compatible host or controller
C. HART-compatible transmitter (internally powered)
D. Model 5700 transmitter (internally powered) mA/HART connections
E. SMART FAMILY
F. 24 VDC loop power supply required for external transmitter
3.4
Wire the Frequency output in an explosion-proof/
flameproof or non-hazardous area
•
Wire the Frequency output (internally powered) (Channels B/C)
(Section 3.4.1)
•
Wire the Frequency output (externally powered) (Channels B/C)
(Section 3.4.2)
•
Wire the Frequency output (internally powered) (Channel D)
(Section 3.4.3)
•
Wire the Frequency output (externally powered) (Channel D)
(Section 3.4.4)
3.4.1
Wire the Frequency output (internally powered) (Channels B/C)
Important
Meter installation and wiring should be performed by suitably trained personnel only in accordance
with the applicable code of practice.
Procedure
Wire to the appropriate output terminal and pins.
32
mA/HART multidrop wiring
™
transmitters
D
®
Micro Motion
Model 5700 transmitters
December 2014
E
F