December 2014
3
Wiring the channels
Topics covered in this chapter:
•
Access the wiring channels
•
Wire the mA output in an explosion-proof/flameproof or non-hazardous
area
•
Wire the mA/HART output in an explosion-proof/flameproof or non-
hazardous area
•
Wire the Frequency output in an explosion-proof/flameproof or non-
hazardous area
•
Wire the Discrete output in an explosion-proof/flameproof or non-
hazardous area
•
Wire the RS-485 output in an explosion-proof/flameproof or non-hazardous
area
•
Wire the mA input in an explosion-proof/flameproof or non-hazardous area
•
Wire the Discrete input in an explosion-proof/flameproof or non-hazardous
area
•
Wire the Frequency input in an explosion-proof/flameproof or non-
hazardous area
3.1
Access the wiring channels
1. Remove the wiring access cover to reveal the I/O wiring terminal block
connectors.
Quick Installation Guide
Installation Manual
25