Wiring The Channels; Installation Types For The 4200 Transmitter - Emerson Micro Motion 4200 Instruction Manual

Installation Manual
MMI-20058013
3

Wiring the channels

3.1

Installation types for the 4200 transmitter

WARNING
If you are installing the transmitter in a hazardous area, refer to Micro Motion approval
instructions, shipped with the product or available from the Emerson web site
( Emerson.com/flowmeasurement). Improper installation in a hazardous area can cause
an explosion.
General configuration
A. 2-wire cable power and signal
B. 4-20 mA
C. mA receiving device
D. HART
E. Distributed Control System (DCS)
F. Emerson AMS Trex communicator
Installation Manual
variables
®
Wiring the channels
March 2024
23