Advertisement
1.
Introduction
1.1
Specification
• DMAC channel 1 is used to transfer data from external memory to the transmit FIFO data register (SCFTDR) in the
serial communication interface with FIFO (SCIF channel 0) in order to transmit character string data.
• SCIF transmit FIFO data empty transfer requests (on-chip peripheral module request) are used to request DMA
transfer.
1.2
Modules Used
• Direct memory access controller (DMAC channel 1)
• Serial communication interface with FIFO (SCIF channel 0)
1.3
Applicable Conditions
• Microcontroller:
• Operating Frequency:
• C Compiler:
• Compile Option:
1.4
Related Application Notes
• The operation of the reference program for this document was confirmed with the setting conditions described in
the application note: SH7263/SH7203 Initialization Example. Please refer to the application note in combination
with this one.
• Details on SCIF UART transmission are described in the application: SH7263/SH7203 Example Settings for UART
Transmission by the SCIF.
Please refer to the above application notes in combination with this one.
REJ06B0734-0101/Rev.1.01
Data Transfer to On-chip Peripheral Modules with DMAC
SH7263/SH7203
Internal clock
200 MHz
Bus clock
66.67 MHz
Peripheral clock
33.33 MHz
SuperH RISC engine family C/C++ compiler package Ver.9.01, from Renesas
Technology
-cpu = sh2afpu -fpu = single -include = "$(WORKSPDIR)\inc"
-object = "$(CONFIGDIR)\$(FILELEAF).obj" -debug -gbr = auto -chgincpath
-errorpath -global_volatile = 0 -opt_range = all -infinite_loop = 0 -del_vacant_loop = 0
-struct_alloc = 1 -nologo
December 2008
SH7263/SH7203 Group
Page 2 of 17
Advertisement
