D Command Table - Icom IC-R30 Advanced Manual

7
OTHER FUNCTIONS
■ CI-V information
D Command table (Continued)
Remarks:
* When sending the power ON command (18 01), you need to repeatedly send "FE" for
1
13 milliseconds before the standard format. The following is the approximate number
of needed repetitions. (Not necessary when the IC-R30 is connected through the
[USB] connector.)
• 19200 bps: 27 "FE"s
• 9600 bps: 13 "FE"s
• 4800 bps: 7 "FE"s
Example: When using 4800 bps
Preamble
F E F E
×7
2
*
When you turn OFF the receiver, the data output setting is automatically set to OFF.
Controller's
IC-R30's
address
address
F E 9 C E 0
7-35
Command
Sub Post
command amble
1 8 0 1 F D