Selecting A Memory Name Display - Icom IC-R30 Advanced Manual

4
MEMORY OPERATION

■ Selecting a memory name display

While in the memory mode, the entered memory name can be displayed in 3 different
styles. You can select a display type.
1. Push [VFO/MR] to select the Memory mode.
2. Push [QUICK].
3. Select "Display Type."
(Rotate [DIAL] to select it, and then push [ENTER].)
4. Select a display type.
L "Freq (Name OFF)" is set as the default.
"Freq (Name OFF)"
Only the frequency is
displayed
"Freq"
Memory name is displayed
under the frequency
4-13
"Name"
Frequency is displayed
under the memory name