Icom IC-R30 Advanced Manual page 162

7
OTHER FUNCTIONS
■ CI-V information
D Commands (Continued)
• NXDN RX Status data
Command: 20 0B01, 20 0B02
Data Function
bit7 0 (Fixed)
bit6 0/1 —
bit5 0/1 NXDN mode
bit4 0/1 Receive status
bit3 0/1 Last call finisher
bit2 0/1 Receiving a signal When the audio tone can be heard, "1" is returned.
bit1 0/1 Interfere detection While under an interference (Mode icon NXDN-
bit0 0/1 Encryption
• DCR RX Status data
Command: 20 0D01, 20 0D02
Data Function
bit7 0 (Fixed)
bit6 0/1 —
bit5 0/1 —
bit4 0/1 Receive status
bit3 0/1 Last call finisher
bit2 0/1 Receiving a signal When the audio tone can be heard, "1" is returned.
bit1 0/1 Interfere detection While under an interference (Mode icon DCR and FM alternately
bit0 0/1 Encryption
• D-STAR RX data (transceive)
Command: 22 0101
• • • • • • • • • • • • • • • • • • • • • • • • X X
X X
q ~ #0 : Rx data (Up to 30 Bytes)
"FA" to "FF" are entered after converted to "FF 0A" to "FF 0F" automatically. In this case,
L
the data length can be up to 60 Bytes.
—
(Reserved)
When the received NXDN signal is "Narrow," "1" is returned.
While receiving an NXDN signal, "1" is returned. (Regardless of
RAN)
When the last call was finished by a user, "1" is returned.
alternately blink), "1" is returned.
When the call is encrypted , "1" is returned.
—
(Reserved)
(Reserved)
While receiving a DCR signal, "1" is returned. (Regardless of UC)
When the last call was finished by a user, "1" is returned.
blink), "1" is returned.
When the call is encrypted , "1" is returned.
q ~ #0
Description
Description
7-51
/ and FM
vn n