Icom IC-R30 Advanced Manual page 92

6
MENU SCREEN
■ Digital Set (Continued)
Separator/Decimal
[MENU] > Digital Set > RX Log > CSV Format > Separator/Decimal
Select the separator and decimal character for the csv format.
• Sep [,] Dec [.]: Separator is "," and Decimal is "."
• Sep [;] Dec [.]: Separator is ";" and Decimal is "."
• Sep [;] Dec [,]: Separator is ";" and Decimal is ","
Date
[MENU] > Digital Set > RX Log > CSV Format > Date
Select the separator and decimal character for the csv format.
Select the date format between "yyyy/mm/dd," "mm/dd/yyyy," and "dd/mm/yyyy."
(y: year, m: month, d: day)
D-STAR Auto Detect
[MENU] > Digital Set > D-STAR Auto Detect
Turn the D-STAR Mode Automatic Detect function ON or OFF.
When in the D-STAR mode, if you receive a non-D-STAR signal, this function
automatically sets the receive mode to the FM mode.
• OFF: Turns OFF the function. The receive mode is fixed to the D-STAR
mode.
• ON: Automatically selects the FM mode for temporary operation.
RX Record (D-STAR RPT)
[MENU] > Digital Set > RX Record (D-STAR RPT)
The receiver can record the data of up to 50 individual calls. When the received signal
includes a status message ("UR?" or "RPT?") that is sent back from the Access repeater,
you can record up to 50 messages, or only the last call, in the Received Call Record.
• ALL: Records up to 50 calls.
• Latest Only: Records only the last call.
D-STAR EMR AF Level
[MENU] > Digital Set > D-STAR EMR AF Level
Set the audio output level to between 0 and 39 for when an EMR communication signal
is received. When an EMR signal is received, the audio is heard at this set level, or the
volume control level, whichever is higher.
To disable the setting, set to "0."
NOTE: After an EMR signal disappears, the audio level will remain at the EMR level. In
this case, adjust the audio level.
6-15
(Default: Sep [,] Dec [.])
(Default: mm/dd/yyyy)
(Default: OFF)
(Default: ALL)
(Default: 19)