Icom IC-R30 Advanced Manual page 88

6
MENU SCREEN
■ GPS (Continued)
Alarm Area (RX/Memory)
[MENU] > GPS > GPS Alarm > Alarm Area (RX/Memory)
Select the GPS active alarm range.
When a target enters in the active alarm range, the GPS Alarm sounds and the GPS
alarm icon blinks.
L When Alarm Select (p. 6-9) is set to "RX" or "Memory," this setting is enabled.
• Limited: The receiver sounds 3 beeps and the GPS Alarm icon blinks when
the target enters the 500 meter range.
• Extended: The receiver sounds 3 beeps and the GPS Alarm icon blinks when
the target enters the 1 kilometer range.
• Both: The receiver sounds a beep and the GPS Alarm icon blinks when the
target enters the 1 kilometer range, and sounds 3 beeps and the icon
blinks when it enters the 500 meter range.
When the target exits the 500 meter range, but is still in the
1 kilometer range, the icon continues to blink, but no beeps sound.
Example:
When a target station enters in the active alarm range (500 meter or 1 kilometer range,
depending on the setting), the GPS Alarm sounds.
Your location
Target station
Extended range
Approximately 1 km, 1094 Y
Limited range
Approximately 500 m, 547 Y
Sounds a beep. Sounds 3 beeps.
6-11
(Default: Both)
N