Icom IC-R30 Advanced Manual page 40

4
MEMORY OPERATION
■ Writing a memory channel (Continued)
D Write to a New Channel
The contents such as frequency and operating mode are written to a blank channel in
the selected group.
Example: Writing 145.000 MHz to a blank channel.
1. Push [VFO/MR] to select the VFO mode.
2. Rotate [DIAL] to set the frequency and receive mode.
3. Hold down [MW] until a beep sounds.
• The memory channel contents are displayed for 2 seconds, and the memory channel is
written to a blank channel.
Content
to be written
Memory group
to belong
4-6