Configuring The Maximum Output Current Percentage - Xantrex Truecharge TC1012 Installation Manual

Table 2-4 Battery Temperature Compensation Levels
Temperature
Selection
Cold
Warm
Hot
Configuring the Maximum Output Current
Percentage
Using only the Remote Panel
To configure the maximum output current:
Note: By default, the Max. Output % is set to 100.
975-0402-01-01
This guide for use by qualified installers only
Configuring the Truecharge™ 2 Battery Charger
Recommended
for battery
temperature of:
below 5 °C
(41 °F)
between
5 and 30 °C
(41 and 86 °F)
above 30 °C
(86 °F)
Press the Set Max Output button to select the appropriate
maximum output setting.
The LEDs will indicate which of the five values is being
selected: 100, 80, 60, 40, or 20.
Voltage added for temperature
compensation offset from 25 °C
Flooded/PbCa/Gel
AGM
Flooded/PbCa/Gel
AGM
Flooded/PbCa/Gel
AGM
0.675
0.525
0
0
-0.27
-0.21
2–31