Installation
Installing Optional Accessories
Optional accessories are available for purchase at Xantrex.
Call Customer Service to order the accessories below:
•
•
Mounting the Optional Remote Panel
To mount the remote panel:
1. Choose a location for the remote panel that is within
2. Use the enclosed mounting template to predrill mounting
3. Connect the RJ-11 connector to the remote panel and
4. Once the Truecharge™ 2 Battery Charger is mounted,
2–24
This guide for use by qualified installers only
Remote Panel (Part number: 808-8040-00)
Battery Temperature Sensor (Part number: 808-0232-01)
15 m (50 ft.) from the charger. Use only the four-
conductor communications cable (RJ-11) that came with
the remote panel.
holes.
Take care that there is nothing behind the surface for you
to damage such as other cables or pipes.
route it to the charger. Be careful not to damage the
connector locking tab when routing the cable. You can
use some tape to protect the locking tab from catching on
something and breaking off when routing the cable.
plug the other RJ-11 connector into the Remote port on
the rear panel of the Truecharge™ 2 Battery Charger.
975-0402-01-01