Onboard Control And Status Display Panel - Xantrex Truecharge TC1012 Installation Manual

Introduction

Onboard Control and Status Display Panel

This section describes the parts of the onboard control and
status display panel of the Truecharge™ 2 Battery Charger.
Important:
means that the button must be held down for more than three
seconds then released in order to send the instruction. A "press"
action on any panel button means that the button must be pressed
and released before two seconds have elapsed.
1
3
4
5
6
Figure 1-3 Onboard Control and Status Display Panel
To reduce current draw from the connected battery when AC
power is not present, the panel's LED control and status
lights are automatically turned off and the buttons are
disabled.
1–8
This guide for use by qualified installers only
A "press and hold" action on any panel button
2
975-0402-01-01