Truecharge™ 2 Battery Charger - Xantrex Truecharge TC1012 Installation Manual

Introduction
Truecharge™ 2 Battery Charger
This section describes the different parts of the Truecharge™
2 Battery Charger.
Figure 1-1 Truecharge™ 2 Battery Charger
Item
1
2
3
1–4
This guide for use by qualified installers only
1
3
5
Description
Onboard control and status display panel or simply
onboard display (see "Rear Panel" on page 1–6 for
more information) for controlling the Truecharge™ 2
Battery Charger settings and for monitoring charger
status and charging current.
Mounting flanges are used to permanently install the
product.
DC wiring compartment cover protects the DC
terminals, as well as the communication and BTS ports.
Remove and replace when installing cables.
2
4
6
975-0402-01-01