Configuring The Truecharge™ 2 Battery Charger - Xantrex Truecharge TC1012 Installation Manual
Truecharge 2 series battery charger
Hide thumbs
Also See for Truecharge TC1012:
- Owner's manual (80 pages) ,
- Owner's manual (80 pages) ,
- Installation manual (66 pages)
Table of Contents
Advertisement
Installation
Configuring the Truecharge™ 2 Battery
Charger
Once the charger is connected to a battery on bank 1 or to
AC, it is live and it may be configured. The indicator LEDs
on the onboard display will illuminate for a second (power on
test) before reporting charging and battery status information.
When the remote panel is connected, there will be a short
delay of about 1three seconds before reporting charging and
battery status information. The remote panel will use this
time to query the charger for the current operating conditions.
If AC was already applied, ensure that the charger is ON by
pressing
2–26
This guide for use by qualified installers only
/
if necessary.
ON
STANDBY
975-0402-01-01
Advertisement
Table of Contents
