Configuring the Battery Charger
Configuring the Battery Charger
Once the charger is connected to AC, it is live and it may be
configured. The indicator LEDs on the onboard status display will
illuminate for a second (power on test) before reporting charging
and battery status information.
You can configure the battery type for Group 1 or Group 2 using
the Onboard Status LED Panel on page 8
NOTE: Be sure to connect the Xantrex BLE Module (PN: 808-
0889) and install the Xantrex App on your smart device in order to
configure your XPLORE Charger. Use the instructions provided
with the XPLORE Charger.
36
XPLORE 120/12 Battery Charger Owner's Guide