Configuring The Battery Charger - Xantrex XPLORE 120A 12V Owner's Manual

Configuring the Battery Charger

Configuring the Battery Charger
Once the charger is connected to AC (mains), it is live and it may
be configured. The indicator LEDs on the onboard status display
will illuminate for a second (power on test) before reporting
charging and battery status information.
You can configure the battery type for Group 1 or Group 2 using
the Onboard Status LED Panel on page 8.
NOTE: Be sure to connect the Xantrex BLE Module (PN: 808-
0889) and install the Xantrex App on your smart device in order to
configure your XPLORE Charger. Use the instructions provided
with the XPLORE Charger.
38 XPLORE 120/12 Battery Charger Owner's Guide