D-Link xStack DGS-3426 Cli Manual page 166

DGS-3400:4# create cpu access_profile profile_id 1 ip vlan source_ip_mask 20.0.0.0
destination_ip_mask 10.0.0.0 dscp icmp type code
Command: create cpu access_profile profile_id 1 ip vlan source_ip_mask 20.0.0.0
destination_ip_mask 10.0.0.0 dscp icmp type code
Success.
DGS-3400:4#
delete cpu access_profile
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To delete the CPU access profile with a profile ID of 1:
DGS-3400:4#delete cpu access_profile profile_id 1
Command: delete cpu access_profile profile_id 1
Success.
DGS-3400:4#
config cpu access_profile
Purpose Used to configure a cpu access profile used for CPU Interface Filtering and to define specific
values that will be used to by the Switch to determine if a given packet should be forwarded
or filtered. Masks entered using the create cpu access_profile command will be combined,
using a logical AND operation, with the values the Switch finds in the specified frame header
fields. Specific values for the rules are entered using the config cpu access_profile
command, below.
Syntax config cpu access_profile profile_id <value 1-5> [ add access_id <value 1-100>
[ethernet {vlan <vlan_name 32> | source_mac <macaddr> | destination_mac
<macaddr> | 802.1p <value 0-7> | ethernet_type <hex 0x0-0xffff>} port [<portlist> | all] |
ip {vlan vlan_name 32> | source_ip <ipaddr> | destination_ip <ipaddr> | dscp <value 0-
63> | [icmp {type <value 0-255> | code <value 0-255>} | igmp { type <value 0-255>} | tcp
{src_port <value 0-65535> | dst_port <value 0-65535> | flag [all | {urg | ack | psh | rst |
syn | fin}]} | udp {src_port <value 0-65535> | dst_port <value 0-65535>} | protocol_id
<value 0 - 255> {user_define <hex 0x0-0xffffffff>}]} port [<portlist> | all] [permit | deny] |
packet_content {offset_0-15 <hex 0x0-0xffffffff> <hex 0x0-0xffffffff> <hex 0x0-0xffffffff>
<hex 0x0-0xffffffff> | offset_16-31 <hex 0x0-0xffffffff> <hex 0x0-0xffffffff> <hex 0x0-
0xffffffff> <hex 0x0-0xffffffff> | offset_32-47 <hex 0x0-0xffffffff> <hex 0x0-0xffffffff>
<hex 0x0-0xffffffff> <hex 0x0-0xffffffff> | offset_48-63 <hex 0x0-0xffffffff> <hex 0x0-
0xffffffff> <hex 0x0-0xffffffff> <hex 0x0-0xffffffff> | offset_64-79 <hex 0x0-0xffffffff>
<hex 0x0-0xffffffff> <hex 0x0-0xffffffff> <hex 0x0-0xffffffff>} port [<portlist> | all] [permit
| deny]] | delete access_id <value 1-100>]
Description The config cpu access_profile command is used to configure a cpu access profile for CPU
Interface Filtering and to enter specific values that will be combined, using a logical AND
operational method, with masks entered with the create cpu access_profile command,
xStack DGS-3400 Series Layer 2 Gigabit Managed Switch CLI Manual
Used to delete a previously created access profile or cpu access profile.
delete cpu access_profile profile_id <value 1-5>
The delete cpu access_profile command is used to delete a previously created
cpu access profile.
profile_id <value 1-5> − Enter an integer between 1 and 5 that is used to identify
the cpu access profile to be deleted with this command. This value is assigned to
the access profile when it is created with the create cpu access_profile command.
Only administrator-level users can issue this command.
163