D-Link xStack DGS-3426 Cli Manual page 225

config ssl cachetimeout timeout
Restrictions
Example usage:
To set the SSL cachetimeout for 7200 seconds:
DGS-3400:4#config ssl cachetimeout timeout 7200
Command: config ssl cachetimeout timeout 7200
Success.
DGS-3400:4#
show ssl cachetimeout
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To view the SSL cache timeout on the Switch:
show ssl
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To view the SSL status on the Switch:
xStack DGS-3400 Series Layer 2 Gigabit Managed Switch CLI Manual
seconds to specify the total time an SSL key exchange ID stays valid
before the SSL module will require a new, full SSL negotiation for
connection. The default cache timeout is 600 seconds
Only administrator-level users can issue this command.
Used to show the SSL cache timeout.
show ssl cachetimeout
Entering this command will allow the user to view the SSL cache
timeout cuurently implemented on the Switch.
None.
None.
DGS-3400:4#show ssl cachetimeout
Command: show ssl cachetimeout
Cache timeout is 600 second(s).
DGS-3400:4#
Used to view the SSL status and the certificate file status on the
Switch.
show ssl
This command is used to view the SSL status on the Switch.
None.
None.
222