D-Link xStack DGS-3426 Cli Manual page 200

DGS-3400:4#config authen_login default method xtacacs tacacs+ local
Command: config authen_login default method xtacacs tacacs+ local
Success.
DGS-3400:4#
delete authen_login method_list_name
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To delete the method list name "Trinity":
DGS-3400:4#delete authen_login method_list_name Trinity
Command: delete authen_login method_list_name Trinity
Success.
DGS-3400:4#
show authen_login
Purpose
Syntax
Description
Parameters
Restrictions
xStack DGS-3400 Series Layer 2 Gigabit Managed Switch CLI Manual
Used to delete a previously configured user defined method list of
authentication methods for users logging on to the Switch.
delete authen_login method_list_name <string 15>
This command is used to delete a list for authentication methods for user login.
<string 15> - Enter an alphanumeric string of up to 15 characters to define the
given method list the user wishes to delete.
Only administrator-level users can issue this command.
Used to display a previously configured user defined method list of authentication
methods for users logging on to the Switch.
show authen_login [default | method_list_name <string 15> | all]
This command is used to show a list of authentication methods for user login.
default – Entering this parameter will display the default method list for users logging
on to the Switch.
method_list_name <string 15> - Enter an alphanumeric string of up to 15 characters to
define the given method list the user wishes to view.
all – Entering this parameter will display all the authentication login methods currewntly
configured on the Switch.
The window will display the following parameters:
Method List Name – The name of a previously configured method list name.
Priority – Defines which order the method list protocols will be queried for
authentication when a user attempts to log on to the Switch. Priority ranges
from 1(highest) to 4 (lowest).
Method Name – Defines which security protocols are implemeted, per method
list name.
Comment – Defines the type of Method. User-defined Group refers to server
group defined by the user. Built-in Group refers to the TACACS, XTACACS,
TACACS+ and RADIUS security protocols which are permanently set in the
Switch. Keyword refers to authentication using a technique INSTEAD of
TACACS / XTACACS / TACACS+ / RADIUS which are local (authentication
through the user account on the Switch) and none (no authentication
necessary to access any function on the Switch).
None.
197