D-Link xStack DGS-3426 Cli Manual page 128

DGS-3400:4#disable igmp_snooping
Command: disable igmp_snooping
Success.
DGS-3400:4#
Example usage:
To disable forwarding all multicast traffic to a multicast-enabled router:
show igmp_snooping
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To show IGMP snooping:
xStack DGS-3400 Series Layer 2 Gigabit Managed Switch CLI Manual
DGS-3400:4#disable igmp_snooping forward_mcrouter_only
Command: disable igmp_snooping forward_mcrouter_only
Success.
DGS-3400:4#
Used to show the current status of IGMP snooping on the Switch.
show igmp_snooping {vlan <vlan_name 32>}
This command will display the current IGMP snooping configuration
on the Switch.
<vlan_name 32> − The name of the VLAN to view the IGMP snooping
configuration for.
None.
DGS-3400:4#show igmp_snooping
Command: show igmp_snooping
IGMP Snooping Global State : Enabled
Multicast router Only
VLAN Name
Query Interval
Max Response Time
Robustness Value
Last Member Query Interval : 1
Host Timeout
Route Timeout
Leave Timer
Querier State
Querier Router Behavior
State
Fast Leave
Total Entries: 1
DGS-3400:4#
: Enabled
: default
: 125
: 10
: 2
: 250
: 260
: 2
: Enabled
: Non-Querier
: Enabled
: Disabled
125