D-Link xStack DGS-3426 Cli Manual page 197

enable authen_policy
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To enable the system access authentication policy:
DGS-3400:4#enable authen_policy
Command: enable authen_policy
Success.
DGS-3400:4#
disable authen_policy
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To disable the system access authentication policy:
DGS-3400:4#disable authen_policy
Command: disable authen_policy
Success.
DGS-3400:4#
show authen_policy
Purpose
Syntax
Description
Parameters
Restrictions
xStack DGS-3400 Series Layer 2 Gigabit Managed Switch CLI Manual
Used to enable system access authentication policy.
enable authen_policy
This command will enable an administrator-defined authentication policy
for users trying to access the Switch. When enabled, the device will
check the method list and choose a technique for user authentication
upon login.
None.
Only administrator-level users can issue this command.
Used to disable system access authentication policy.
disable authen_policy
This command will disable the administrator-defined authentication policy
for users trying to access the Switch. When disabled, the Switch will
access the local user account database for username and password
verification. In addition, the Switch will now accept the local enable
password as the authentication for normal users attempting to access
administrator level privileges.
None.
Only administrator-level users can issue this command.
Used to display the system access authentication policy status on
the Switch.
show authen_policy
This command will show the current status of the access
authentication policy on the Switch.
None.
None.
194