Danfoss OSPE Service Manual page 13

Service Manual
Dismantling
OSPE Steering Valve
Dismantling OSPE (continued)
Remove the EH L&R cut off spool (242).
Screw out the plug (207).
If the OSPE is with priority valve integrated:
Use a 17 mm socket or ring spanner. O-ring (312) is
fitted on plug (207).
If the OSPE is without priority valve integrated:
Use a 8 mm Hex key. This plug is fitted with O-ring
(312) and (313).
Remove the spring (231).
Remove the priority valve spool (203).
Orifices (230) and (232) are screwed into spool (203).
L1506577 • Rev 0001 • August 2015 13