Danfoss OSPE Service Manual page 40

Service Manual
Assembly
40
OSPE Steering Valve
Assembling OSPE (continued)
OSPE with priority valve:
Place the O-ring (312) on plug (207 with 17 mm key
profile).
Screw in the plug (207) using a 17 mm
spanner 45 ±5 Nm.
OSPE without priority valve:
Place the O-rings (312, 313) on plug (207 with 8 mm
Hex key profile).
Screw in the plug (207) using a 8 mm
45 ±5 Nm.
Insert the EH L&R cut off spool (242) with the spring bore
pointing outwards.
Insert the spring (241). Dimension of this spring: Wire
diameter: 2.2 mm Length: 50.2 ±0.8 mm
Place the O-ring (312) on plug (243). Screw in the plug
(243) using a 17 mm socket spanner
L1506577 • Rev 0001 • August 2015
socket
Hex key.
45 ±5 Nm.