Table of Contents
Advertisement
Service Manual
Dismantling
OSPE Steering Valve
Dismantling OSPE (continued)
Press the neutral position springs (14) out of the slot of
the spool.
Remove dust seal (9) and shaft seal (Roto Glyd) (7)
carefully with a screw driver or similar tool.
The steering unit OSPED is now completely dismantled
Cleaning Clean all parts carefully in Shellsol K or similar
cleaner fluid.
Inspection and replacement
Replace all seals and washers. Check all parts carefully
and make any replacements as is necessary.
L1506577 • Rev 0001 • August 2015
25
Advertisement
Table of Contents
Need help?
Do you have a question about the OSPE and is the answer not in the manual?
Questions and answers