Danfoss OSPE Service Manual page 41

Service Manual
Assembly
OSPE Steering Valve
Assembling OSPE (continued)
Check proper movement of EH spool (202): press on
spool end, the spool must be able to be moved
downwards 4 mm with force < 100N, and it must be able
to return to starting position by help of the neutral spring
package integrated in the spool end facing plug (205).
Place O-rings (320, 321, 322) and filter (323) on PVE (204).
Place the PVE (204) on OSPE housing as illustrated and
screw in the 4 screws for the PVE (233) using a 5 mm
Hex key. 8 ±1 Nm.
Place coil 247 on cartridge for pilot dump (246). Place O-
ring (249) and nut (248) on cartridge for pilot dump (246).
Screw in the nut (248) using a 19 mm
5 ±1 Nm.
Make test and valve setting according to description,
seeSteering test on page 43.
Screw in the plastic plugs into the connection ports to
keep the ports clean during storage and transportation.
L1506577 • Rev 0001 • August 2015
socket spanner
41