Danfoss OSPE Service Manual page 34

Service Manual
Assembly
34
OSPE Steering Valve
Assembling OSPE (continued)
OSPED: Place and rotate the cardan shaft (120) with the
big diameter end until it moves in gear with gear wheel
of gear set (30).
OSPED: Place the middle distributor plate (116) so that
the channel holes match the holes in the gear set.
OSPED: Place the 2 O-rings (39) in the two groves in the
valve housing assembly (122). Place the valve housing
assembly so that the one and only M8 thread whole
points upwards and direction port face for P, T, L and R
connections.
Make sure that channel holes of the valve housing
assembly (122) match the holes in the distributor plate
(116).
L1506577 • Rev 0001 • August 2015