Danfoss OSPE Service Manual page 24

Service Manual
Dismantling
24
OSPE Steering Valve
Dismantling OSPE (continued)
Press the spool (1) inwards (from the steering column
end) and the sleeve (1), ring (16), neutral position springs
(14) and bearing assembly (18) will be pushed out of the
housing together.
Take the bearing races with needle bearing (18) and the
ring (16) off from the spool and sleeve set (1). The outer
bearing (18) race can sometimes "stick" in the housing,
therefore check that it has come out.
Press out the cross pin (12).
Carefully press the spool out of the sleeve.
L1506577 • Rev 0001 • August 2015