Table of Contents
Advertisement
Service Manual
Assembly
OSPE Steering Valve
Assembling OSPE (continued)
Screw in the plugs (253) and (254) using a 6 mm
key.
20 ±3 Nm.
These plugs not present in all OSPE's.
Place O-rings (330, 331, 332) on cartridge spool (246).
Screw in the cartridge spool (246) using a 7/8 inch
ring spanner.
15 ±2 Nm.
OSPE with priority valve: Assemble spool (203) with the
PP orifice (230) using a 3 mm
Nm. And with dynamic orifice (232) using a 2 mm
Hex key.
1 ±0.1 Nm. Insert the priority valve spool
(203) with the spring bore pointing outwards.
OSPE with priority valve:
Insert the spring (231). Dimension of this spring depends
on specification of priority valve.
L1506577 • Rev 0001 • August 2015
Hex
Hex key.
3.5 ±0.5
39
Advertisement
Table of Contents
