Danfoss OSPE Service Manual page 16

Service Manual
Dismantling
16
OSPE Steering Valve
Dismantling OSPE (continued)
Screw out the seats for shock valves (63) using a 2.75 mm
Hex key.
O-ring (41) is fitted on seat (63).
Screw out the plug (205) using a 32 mm
spanner.
O-ring (310) is fitted on plug (205).
Remove the EH-spool (202).
Screw out the plugs (209) using an 8 mm
O-ring (311) is fitted on plug (209)
The left side positioned plug is only present on OSPE's
with priority valve integrated.
Replace the unit in the holding tool on steering column
end.
L1506577 • Rev 0001 • August 2015
socket
Hex key.