Table of Contents
Advertisement
Service Manual
Assembly
30
OSPE Steering Valve
Assembling OSPE (continued)
Put the check valve ball (5) into the hole indicated by the
circle.
Screw in the screw (4) using a 12 mm screw driver.
1.5 ±0.3 Nm.
Assemble spring (86) and cone (87 on screw (85).
Place the assembly in the hole indicated by the circle.
Screw in the screw (85) using a 12 mm screw driver.
1.5 ±0.3 Nm.
Put the suction valve balls (81) into the holes indicated by
the circles.
L1506577 • Rev 0001 • August 2015
Advertisement
Table of Contents
