Move To User Specified Location" Dialog Box - Roland MDX-50 User Manual

"Settings" Dialog Box

"Move to user specified location" Dialog Box

- [Origin] tab - [Move]
Coordinate system
Stop
Coordinates
Amount of relative
movement
X, Y, Z
Move
A
Rotate
62
6. VPanel Operation (Practical Use)
Select the coordinate system to use when specifying coordinate values. This is disabled
when "Amount of relative movement" is selected.
Select one of the following options.
"Machine coordinate system"
"User coordinate system" (when RML-1 is selected)
"G54" to "G59" or "EXOFS" (when NC code is selected)
Stop the tool bur movement. This button is only enabled during tool bur movement.
Specify the coordinate value to move to. (Absolute specification)
Specify the amount of movement from the current position. (Relative specification)
Enter the coordinate value of the movement destination or the movement amount.
Unit: [mm], [inch]
Move the tool bur to the specified position or by the specified amount (X, Y, and Z).
Enter the angle or the amount of rotation of the rotary axis. This is only enabled when
the (optional) rotary axis unit is attached.
Unit: Degrees
Rotate the rotary axis (A) to the specified angle or by the amount of rotation.