Pausing/Resuming/Canceling Cutting
This procedure pauses the cutting operation. You can also resume cutting from the location where you paused it.
Procedure
A
Press [PAUSE/CANCEL].
This pauses the machine.
B
Press [PAUSE/CANCEL].
The screen shown in the figure appears.
C
Use the hand-wheel to select the desired item.
D
Press [ENTER].
Functions That Can Be Operated While Cutting Is Paused (Built-in Panel)
Hand-wheel feeding
Starting and stopping spindle rotation
Setting overrides
Aborting cutting
Resuming cutting
ME MO
You can set the tool bur operation when the machine
is paused.
P. 52 "Tool up in pause"
Yes : Resume cutting.
No : Continue to pause cutting.
Cancele job : Cancel cutting.
5. Built-in Panel Operation (Practical Use)
Built-in Panel Functions
47