Emergency Stop or Pause Due to Opening or Closing the Cover
Pause Due to Opening or Closing the Cover
To ensure safety, opening the front cover or the dust box cover during standby, when operations are paused, or in other
situations when the spindle is not rotating will cause the machine to pause its operations and display a message. When you
clear the message using the following procedure, the machine will return to the previous screen.
Canceling a Pause
Procedure
A
A message is displayed on the built-in panel.
B
Close the cover, and then press [ENTER].
The machine returns to the state that it was in prior to the cover being opened. If the machine was performing
automatic correction or Z0 sensing, it completes the operation and moves to the view position.
14
3. Cutting (One Side Cutting)