VPanel Basic Operation
VPanel Display in the Task Tray
When the VPanel icon is displayed in the task tray, the status of the connected cutting machine is always monitored. The display
of the VPanel icon changes depending on the status of the cutting machine. The meanings of the displays are shown below.
Exiting VPanel
8
2. VPanel Operation (Basic)
Indicates that the cutting machine is on (is online).
Indicates that the cutting machine is off.
Indicates that an error has occurred on the cutting machine.
Messages are displayed automatically if an error occurs, during cutting, and in similar
situations. Even after the message disappears, if you hover the mouse pointer over this
icon, the status of the machine (such as Ready, Cutting, Finished, Completed, or Offline)
will be displayed.
Right-click
in the task tray, and then click [Exit].
ME MO
Even if you click the Close button ([x]) to close the top
window, you will not exit VPanel.