Step 2 : Loading The Tool Bur On The Machine - Roland MDX-50 User Manual

3. Cutting
CAUT I O N
When using the 3 mm, 4 mm (0.12 in., 0.16 in.) tool holder, insert the tool bur 10 mm (0.39 in.) or more from the bottom of
the tool holder.
C
Use the hexagonal screwdriver to secure the mounting screw.

Step 2 : Loading the Tool Bur on the Machine

WARNING
CAUTION
Procedure
A
Perform movement to the view position.
Move the table to the front to make this work easier.
" P.42 "Quickly Moving to a Specific Position"
B
Open the front cover.
20
3. Cutting (One Side Cutting)
SHANK
END
ROTARY
TABLE
Securely fasten the cutting tool and workpiece in place. After securing in place, make
sure no wrenches or other articles have inadvertently been left behind.
If you do not check for these articles, they may be thrown from the machine with force, pos-
ing a risk of injury.
Be careful around the cutting tool.
The cutting tool is sharp. Broken cutting tools are also dangerous. To avoid injury, exercise
caution.
10 mm (0.39 in.) or
more